Design-X-IC40-HF mit Nachlaufachse
Hi, um den IC40HF mit entgegenlenkender dritten Achse auszustatten, könnt ihr euch folgende Stringtable kopieren, und im Editor über Tools -> import Stringtable als stringtable.str ausgeben lassen.
Code:
'COPY' "Copyright 2006-2009 TML-EDITION OHG / TML-STUDIOS / All rights reserved."
'TYPE' "VBUS"
'NAME' "Design-X-IC40HF"
'NODE' ""
{
'CHAS' "chassis"
{
'MASS' "21500.0"
'CENT' ""
{
'XPOS' "0.0"
'YPOS' "0.0"
'ZPOS' "-1.5"
}
'WIDT' "2.6"
'HEIG' "3.0"
'LENG' "16.0"
}
'TIRE' "6"
{
'TIR0' "frontLeftTire"
{
'WIDT' "0.35"
'RADI' "0.611"
'MASS' "50.0"
'SUSP' "0.15"
'FLAG' "1"
'SPRF' "25.0"
'SHOF' "0.70"
}
'TIR1' "frontRightTire"
{
'WIDT' "0.35"
'RADI' "0.611"
'MASS' "50.0"
'SUSP' "0.15"
'FLAG' "1"
'SPRF' "25.0"
'SHOF' "0.70"
}
'TIR2' "rearLeftTire"
{
'WIDT' "0.35"
'RADI' "0.611"
'MASS' "60.0"
'SUSP' "0.15"
'FLAG' "5"
'SPRF' "10.0"
'SHOF' "0.70"
}
'TIR3' "rearRightTire"
{
'WIDT' "0.35"
'RADI' "0.611"
'MASS' "60.0"
'SUSP' "0.15"
'FLAG' "5"
'SPRF' "10.0"
'SHOF' "0.70"
}
'TIR4' "middleRightTire"
{
'WIDT' "0.35"
'RADI' "0.611"
'MASS' "60.0"
'SUSP' "0.15"
'FLAG' "2"
'SPRF' "10.0"
'SHOF' "0.70"
}
'TIR5' "middleLeftTire"
{
'WIDT' "0.35"
'RADI' "0.611"
'MASS' "60.0"
'SUSP' "0.15"
'FLAG' "2"
'SPRF' "10.0"
'SHOF' "0.70"
}
}
'DLEV' "driveLever"
{
'POSR' "-0.175"
'POSN' "-0.085"
'POSD' "0.0"
'POS2' "0.085"
'POS1' "0.175"
}
'CAMC' "Chassis camera count"
{
'VALU' "5"
}
'WIPL' "left wiper anmimation file"
{
'FILE' "model/bus/wiperLeft"
}
'WIPR' "right wiper anmimation file"
{
'FILE' "model/bus/wiperRight"
}
}
'DATA' ""
{
'MAXV' "max. values"
{
'TORQ' "2500.0"
'STER' "45.0"
'REVS' "15.0"
'SPED' "88.51337"
'TEM1' "24.14001"
'TEM2' "56.32669"
'BACK' "2.8"
'STWL' "720.0"
}
'LVSP' "level speeds"
{
'LVS0' "5.5555"
'LVS1' "11.1111"
'LVS2' "16.6666"
}
'ENGI' "Engine"
{
'ACCL' "2.5"
}
'BRAK' "Brake"
{
'FORC' "33000.0"
'HAND' "1.0"
'NORM' "0.5"
}
'STER' "steering"
{
'PARM' "0.005"
}
'SEAT' "seats"
{
'COUN' "32"
}
}
'SNDS' "Sounds"
{
'STRT' "sound/bus/startMotor"
'STOP' "sound/bus/stopMotor"
'STND' "sound/bus/motorStand"
'MOTR' "sound/bus/motor"
'LEVR' "sound/bus/driveLever"
'KDW1' "sound/bus/kneelingDown1"
'KDW2' "sound/bus/kneelingDown2"
'KNUP' "sound/bus/kneelingUp"
'BACK' "sound/bus/backward"
'BRK1' "sound/bus/brake1"
'BRK2' "sound/bus/brake2"
'BRK3' "sound/bus/brake3"
'BRK4' "sound/bus/brake4"
'BEVS' "sound/bus/beforeStand"
'PRE1' "sound/bus/pressure1"
'PRE2' "sound/bus/pressure2"
'ACCE' "sound/bus/accelerate"
'HORN' "sound/bus/horn"
'DE01' "sound/bus/driveEffect1"
'DE02' "sound/bus/driveEffect2"
'DE03' "sound/bus/driveEffect3"
'DE04' "sound/bus/driveEffect4"
'DE05' "sound/bus/driveEffect5"
'DE06' "sound/bus/driveEffect6"
'DE07' "sound/bus/driveEffect7"
'DE08' "sound/bus/driveEffect8"
'DE09' "sound/bus/driveEffect9"
'DE10' "sound/bus/driveEffect10"
'DE11' "sound/bus/driveEffect11"
'DE12' "sound/bus/driveEffect12"
'DE13' "sound/bus/driveEffect13"
'DE14' "sound/bus/driveEffect14"
'DE15' "sound/bus/driveEffect15"
'DE16' "sound/bus/driveEffect16"
'DE17' "sound/bus/driveEffect17"
'DE18' "sound/bus/driveEffect18"
'DE19' "sound/bus/driveEffect19"
'DE20' "sound/bus/driveEffect20"
'DE21' "sound/bus/driveEffect21"
'LIFT' "sound/bus/liftControl"
}
'INTF' "Interface"
{
'DLBW' "texture/interface/display/driveLeverBackward"
'DLNL' "texture/interface/display/driveLeverNull"
'DLDR' "texture/interface/display/driveLeverDrive"
'DLM2' "texture/interface/display/driveLeverMaxLevel2"
'DLM1' "texture/interface/display/driveLeverMaxLevel1"
'TAC1' "texture/interface/display/tachometer01_x256"
'TAC2' "texture/interface/display/tachometer02_x256"
'BAR1' "texture/interface/display/barometer01_x256"
'BAR2' "texture/interface/display/barometer02_x256"
'SROF' "texture/interface/display/stopRequestOff"
'SRON' "texture/interface/display/stopRequestOn"
'PINS' "Pins"
{
'COLR' "colors"
{
'TACH' "Tachometer"
{
'RCOL' "1.0"
'GCOL' "0.75"
'BCOL' "0.34"
}
'BAR1' "Barometer 1"
{
'RCOL' "1.0"
'GCOL' "1.0"
'BCOL' "1.0"
}
'BAR2' "Barometer 2"
{
'RCOL' "1.0"
'GCOL' "0.0"
'BCOL' "0.0"
}
}
'VALU' "Pin values"
{
'TACH' "Tachometer"
{
'MINA' "1.0F"
'MAXA' "5.3"
'MXTS' "85.0"
}
'BARO' "Barometer"
{
'MINA' "0.85"
'MAXA' "4.55"
}
}
}
}
'ARLT' "Armature light texture"
{
'NAME' "texture/bus/armatureLight"
}
Das bitte in die Stringtable vom Design-X-IC40-HF kopieren (die Textdatei findet ihr im Ordner:
City Bus Simulator 2010 - New York\Import\Game\userdata\vehicles\IC40HF)
Danach natürlich Textdatei speichern, Spiel starten, Editor starten (STRG+N), oben auf Tools -> Import Stringtable, Stringtable.txt vom IC40HF auswählen, der Editor macht die *.str draus.
Editor schliessen, freie Fahrt starten, und auf die Achse achten.
MfG
Johnny
Achja, die Parameter die ihr einstellen könnt sind:
Lenkeinschlag der Nachlaufachse
'REVS' "15.0"und bei den entgegenlenkenden Rädern: Flag auf 5 stellen.
Code:
}
'TIR3' "rearRightTire"
{
'WIDT' "0.35"
'RADI' "0.611"
'MASS' "60.0"
'SUSP' "0.15"
'FLAG' "5"
'SPRF' "10.0"
'SHOF' "0.70"
}
